Multi-Purpose Wood Treatment

Description

Multi-Purpose Wood Treatment protects all interior and exterior wood from rot and insect attacks. It soaks deep into the wood so prevents future infestations from woodworm and other insects. It can also be sprayed so application is quick and easy.

Product features

  • Long last protection with a clear finish
  • Prevents wet and dry rot
  • Stops woodworm attacks and infestations
  • Protects against insect attacks
  • Can be painted over with paint, stain, oil or varnish

Data sheets

Usage: Interior and exterior rough sawn wood
Coverage: Up to 8m2 per litre
Dry time: Ready to paint over in 24 hours
Coat time: 1-2 hours
Number of coats: Three
Colours: Clear
Finish: Gloss
Durability: Prevents wet and dry rot and prevent insect attacks and infestations
Application: Brush or sprayer
Base: Water
Sizes: 2.5L, 5L
VOC: Minimal
Multi-Purpose Wood Treatment
Find a stockist

How do the colours look?

colour inspector image
Make colour your selection

Number of coats

Three coats

Coverage

Up to 8m2 per litre

Application

Brush or spray on

Use on...

Application
  1. Use a brush or sprayer to apply a thin coat to your wood. End grains should be dipped and don’t forget about joints too.
  2. Wait roughly 1-2 hours for the first coat to dry.
  3. Apply the second coat.
  4. Wait roughly 1-2 hours for the second coat to dry.
  5. Apply the third coat.
  6. After 24 hours your wood will be ready to paint over.

Multi-Purpose Wood Treatment is suitable for brand new wood. If you treat it at the beginning, you won’t have to worry about it.

Aftercare

Cleaning

Remove as much product from your brush or sprayer as possible and then clean it in warm soapy water.

You should never pour unused treatment down the drain. Instead, contact your local council for information on the proper way to dispose of it.

Maintenance

Multi-Purpose Wood Treatment can be varnished, oiled or painted over. It will protect again all future infestations and put a stop to wet and dry rot.