Multi Purpose Powder Smooth Finish Filler

How will this colour look? Buy from retailer

Description

Fill holes in almost any surface including plaster, stone, concrete and wood. Our Multi Purpose Powder has a smooth finish so it’s easy to sand. It’s tough too and won’t shrink or crack.

Product features

  • Fill holes up to 40mm deep
  • Comes with a measuring scoop and applicator
  • Dry in one to two hours
  • Suitable for interior and exterior use
  • Minimal prep needed

Data sheets

Usage Interior or exterior surfaces including plaster, stone, concrete and wood.
Dry time One to two hours
Coat time One to two hours
Number of coats One for holes smaller than 40mm, several for holes over 40mm.
Colours White
Finish Matt
Durability Fills deep holes and leaves a tough repair that won’t shrink or crack
Application

Flat scraper

Filler base Water
Size 500G, 1KG, 2KG
VOC Minimal
Multi Purpose Powder Smooth Finish Filler
Find a stockist

How do the colours look?

colour inspector image
Make colour your selection

Number of coats

One coat for 40mm gaps. More coats needed if gap is deeper.

Coverage

Up to 40mm gap

Application

Measuring scoop and applicator included

Use it on...

Interior or exterior surfaces including plaster, stone, concrete and wood.

Use on...

Before you start

There’s not a lot of preparation needed, all you have to do is make sure the area is clean from grease and dust and dry too.

Application
  1. Using the measuring scoop, mix two parts filler to one part water.
  2. Push the filler firmly into the hole or crack, leaving a little bit slightly raised above the surface to ensure it’s completely filled.
  3. Before it dries, smooth it with a wet knife.
  4. If you’re filling holes that are deeper than 40mm, you will need to build up in layers waiting one to two hours between layers. Before each is dry, smooth over with a wet knife.
Aftercare

After one to two hours, you’ll be able to redecorate over the filler.

Cleaning

Tools can all be cleaned in warm, soapy water.