6 Year Anti Mould Aerosol
Description
Product features
- Stop common mould from growing
- Easy to apply
- Dry in 10 minutes
- Prevents all common mould (including black mould) from growing
Technical specification
| Usage: | Interior walls and ceilings |
| Coverage: | Up to 13m2 per litre |
| Dry time: | Completely dry for 24 hours |
| Coat time: | 10 minutes |
| Number of coats: | Two to three |
| Colours: | White |
| Finish: | Matt |
| Durability: | Stops mould growing for six years |
| Application: | Aerosol |
| Sizes: | 0.4L |
How much paint do I need?
Measure your area precisely, drop the numbers into this smart calculator and it will tell you straight away how many litres you'll need to complete your project.
It will take you roughly 7-10 hours to do the DIY That's the same as watching Fast & Furious one to five.
How do the colours look?
Use on...
The room needs to be above 10°c and open windows and doors for added ventilation. Put down dustsheets to prevent paint getting everywhere and mask off areas surrounding the mould to avoid overspray.
How to prepare walls
- If there is already mould on your walls, remove it with mould killer. Don’t try and get rid of it by sanding or any other means as this could spread the mould spores.
- Remove any loose or peeling plaster or paint by sanding it. This will give you a smooth surface and help the Anti Mould paint stick.
Application
- Shake the can until you hear it rattle. Keep shaking for another minute.
- Hold the can upright roughly 20-30cm away from the wall or ceiling.
- Spray from side to side to get an even finish.
- Wait 10 minutes for the first coat to dry.
- Apply the second coat and wait another 10 minutes.
- Check the coverage to see if you need to apply a third coat.
- After you’ve applied the final coat, wait 24 hours before letting condensation build up in the room.
Don’t paint over the Anti Mould Paint as this will stop it from working.
The Anti Mould Paint will protect your walls or ceiling from mould for up to six years so you shouldn’t have any mould to clean off after application.
Cleaning
Hold the can upside down and spray for a few seconds. Then wipe the nozzle with a damp cloth.